Hệ thống đo độ mài mòn, độ vỡ viên thuốc

ELECTROLAB microcontroller-based EF-2 Friabilator

• ELECTROLAB microcontroller-based EF-2 Friabilator is designed to meet USP. IP, EUR pharmacopeia. EF-2 offers a counter and timer mode of operation.
• The unique design allows filling and auto discharging of test samples without opening or removing the drum from its axis. A 10° tilt is provided to prevent jamming of the tablets when tumbling
• The unit supports ELECTROLAB AD Drums™ as well as “Abrasion” Drums. It has a unique front-loading system, which allows up to two drums to be loaded simultaneously on the instrument. The drums are designed to positively engage with the drive to prevent any slippage. Single or double drums can be held in position by a snap-lock knob.
• At the end of the test, the test samples are automatically discharged into their individual trays. After discharging the samples, the drum positions
  itself automatically for loading new samples. The drums are rotated by a maintenance-free stepper motor drive with a constant speed of 25 RPM.
• The test can be performed in two modes — Time and Revolution Count. The time duration and the revolution count are programmable. The values
  once programmed are retained in the memory of the instrument. The microcontroller, self validates the revolution count.
• EF-2 has a power failure detection facility. If the power fails during the test, the remaining test is completed when the power supply is resumed.

Specifications: ELECTROLAB microcontroller-based EF-2 Friabilator

• Speed 25 RPM
• Acccuracy: ± 1 RPM
• Timer: 1 sec to 9 hrs. 59 min. 59 sec
• Counter: 1 to 99,999 revolutions
• No. of Drums: Two
• Drive System: 6 VDC, 3.5 kg/cm Stepper motor drive
• Power*: 220 / 230 VAC, 50 Hz, 20 W
• Weight: Nett – 12 kgs, Gross – 15 kgs
• Dimension: 350 (W) x 310 (D) x 430 (H) mm Approx