Solid Phase Extraction Systems

1. Overview

• The EconoTrace® Parallel Solid Phase Extraction System is an automated One-Step Extraction and Concentration System is designed to streamline your workflow and increase productivity by automating the manual steps in your sample preparation process. The EconoTrace® Parallel Solid Phase Extraction System uses consistent reproducible positive pressure pumping to replace older manual Liquid-Liquid Extraction techniques, automates existing manual SPE methods, and outdated semi-automated instruments.
• The EconoTrace® Parallel SPE System is designed to streamline your laboratory’s workflow and increase productivity by automating the manual steps in your sample preparation process. The EconoTrace Parallel SPE system automates existing manual SPE techniques and replaces older manual Liquid-Liquid Extraction techniques and outdated semi-automated instruments.
  The EconoTrace Parallel SPE system combines extraction, drying, and concentration into one step, providing a truly automated total sample prep solution for the laboratory.  Load samples onto the EconoTrace Parallel SPE system and start the automated extraction process. After loading the sample onto the SPE cartridge at the programmed flow rate, the drying step is accomplished using Nitrogen. This drying step replaces manual techniques. The analytes of interest are then eluted directly to the SuperVap Concentrator where the concentration process automatically brings the extract to final volume in an autosampler vial, ready for final analysis.  Automating these processes into one step ensures the highest quality results in the shortest amount of time and eliminates both losses of compounds of interest from human error and the possibility of contamination.

  Economical

  Low-Cost System for Drinking Water and Clean Matrices
  It is a Modular System that can Expand from 1 to 4 Modules to meet the laboratories needs
  Runs 2 Samples in Parallel per Module
  Runs up to 8 Samples in Parallel
  Reduces Errors and Costs
  One-Step Automated SPE and Concentration eliminates human error, saves labor costs and reduces solvent usage while increasing your sample throughput
  Eliminates Glassware
  Separates Aqueous from Organic Waste

  Fully Automated

  Hyphenates the entire sample prep process: extraction, drying, and concentration steps into one process.
  Runs up to eight samples simultaneously
  Automatic sample bottle rinse
  Concentrates samples up to 250ml directly to a GC vial

  High Speed

  The fastest automated Positive Pressure sample processing available for SPE cartridges and columns of all sizesPositive pressure pumping for fast, simultaneous loading of samples
  Positive pressure pumping for fast simultaneous loading of samples
  Versatile
  Handles a wide range of sample sizes and all matrix types
  Sample Sizes 2 mL to 8 L
  Expandable from 1 to 4 modules, 2 samples per module

  Efficient

  Uses all SPE cartridge and column sizes
  Positive pressure pumping for loading samples
  Nitrogen drying

  Compliant

  Complies with existing methods that require positive pressure pumping for the precise delivery of sample and solvents
  Dispenses up to six solvents using an HPLC pump to deliver precise volumes and flow rates for sample loading, conditioning, and elution

  Easy Documentation

  Programs and stores an unlimited number of methods and runs on an SD Card
  Easy method transfer
  Easy-to-use touch screen

2. Technical Details

• Dimensions: 15”W x 18”D x 28”H
• Weight: 65lbs
• Gas Requirements: Nitrogen – 20 PSI minimum
• Pump: Piston Displacement Flow
• Flow rate: 0.2 to 15ml/minute
• Electrical Input: 110/220Volts, 50/60HZ
• Controller: Integrated Touch Screen Control