Electrolab 21 litre Mobile Dissolution Media Preparator

1. Overview

• Enables filtration, pre-heating, dearation, and precise dosing of media in the vessel within the dissolution bath
• 21 litre media tank capacity allows filling of dissolution vessels for upto 3 dissolution tests (n=6)
• Batch degassing ensures inter-vessel degassing consistency
• Volumetric dispensing with an accuracy better than 1% as per USP, FDA and Ph. Eur. requirement
• Special nozzle design allows the handling of surfactant and frothing media like Sodium Lauryl Sulphate (SLS)
• Programmable deaeration time, temperature and vacuum for effective deaeration of different media
• Maintains media under vacuum at desired temperature while in idle condition
• Virtually zero dead volume minimizes wastage of media
• Programmable dispensing volumes from 200 ml to 4 ltrs
• Fast filling of dissolution vessels at a dispensing rate of 900 ml/ min
• Programmable rinse and cleaning cycle allows the instrument to run through a prevalidated self cleaning procedure
• On- board memory stores 10 batch information of degassed media
• Unparalleled versatility due to 1 ml volume change increments
• 360 turning radius allows it to be maneuvered in tight places
• Multifunction single hose for dispensing, aspirating, cleaning, rinsing and draining ensures no lifting of heavy media tanks
• Ergonomically designed nozzle with embedded dispense switch for ease of operation
• User friendly validation and calibration of media volumes
• Print out of validation, calibration, dispensed volume and temperature reports

2. Features:

• Media Volume: Programmable from 0.2 litre to 21 litres
• Accuracy: ±1%
• Flow rate: 900 ml/min. (During run cycle)
• Dispense:

• Dispense Volume: Programmable from 0.2 L to  4 L
• Accuracy: Better than  ±1%
• Flow rate: 900 ml/min.
•  Temperature: Temperature Range: 20 o C to 50 o C
• Accuracy: ±0.5 o C
• Media preparation time: 45 min. (For 21 L of media @ambient temperature 25 o  C)

•  O 2  level: Normal tap water which contains 85% of dissolved O 2  before degassing will contain 40% of dissolved O 2  after degassing (Measured by  DO 2  meter)
•  Hose: Single (For aspiration, dispense and   drain)
• Media tank: S.S. 316, Teflon coated
• Vacuum pump: 760 mmHg
• Piston pump: Ceramic metering piston pump
• Accuracy: Better than ±1%
• Power: 1200 watts
• Power supply: 230V AC/50 Hz. ±10%,  : 100/110 VAC, 50/60 Hz, 550VA (on request)
• Ambient conditions:

• Humidity: 70% max.
• Storage temperature: 10 o  C to 50 o  C
• Operating temperature: 10 o  C to 30 o  C

• Dimensions: (ǿ 554 x 920 H) mm
• Weight: Net 100 kgs